G0513 Labels - Grizzly G0513 Series Owner's Manual

G0513
177V2
G0513 Series
• 1:1 Sizing (Labels are
actual size)
Generic Labels MODEL G0513
• Labels must be made of
17" 2 HP BANDSAW
oil-resistant material
Specifications
Motor: 2 HP, 110V/220V, 1-PH, 60 Hz To reduce risk of serious injury when using this machine:
Motor Prewired: 220V 1. Read & understand owner's manual before operating.
Amp Draw: 10A at 220V; 20A at 110V 2. Never touch moving blade—keep hands out of blade path.
Table Size: 17" x 17" 3. Always wear approved eye protection and respirator.
Blade Speeds: 1700 & 3500 FPM 4. Only remove jammed cutoff pieces when blade is stopped.
Blade Length: 131-1/2" 5. Use push stick or holding jig to cut small or narrow pieces.
Blade Width Range: 1/8" – 1" 6. Disconnect power before changing blades or adjusting.
Max. Cutting Width Left of Blade: 16-1/4" 7. Maintain adjustment of blade tension, tracking, & guides.
Max. Cutting Height: 12-1/8" 8. Keep upper guide adjusted to just clear the workpiece.
Table Tilt: 10˚L ⁄ 45˚R 9. Hold workpiece firmly against table to maintain control.
Weight: 266 lbs. 10. Only run saw with wheel covers closed & all guards in place.
11. Never reach under table while blade is in motion.
12. Secure/remove loose clothing and long hair.
G0513 Series
Date
13. DO NOT expose to rain or use in wet locations.
14. DO NOT operate under influence of drugs or alcohol.
SN
15. Prevent unauthorized use by children or untrained users;
Mfd. for Grizzly in Taiwan restrict access or disable machine when unattended.
Generic Labels
(7/12/13)
191
WARNING!
To reduce risk of death
INJURY HAZARD!
or serious injury, read
manual BEFORE using Do not open door
machine.
while machine is
To get a new manual,
179 connected to power
call (800) 523-4777 or
or blade is in motion.
go to www.grizzly.com.
WARNING!
EYE/LUNG INJURY
HAZARD!
COPYRIGHT © GRIZZLY INDUSTRIAL, INC. Always wear safety
glasses and a
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
respirator when
Grizzly will not accept labels changed without approval. If
using this machine.
artwork changes are required, contact us immediately at manuals@grizzly.com.
180
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
.
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
• 1:1 Sizing (Labels are artwork changes are required, contact us immediately at manuals@grizzly.com.
To reduce risk of death
or serious injury, read
actual size)
manual BEFORE using
machine.
• Labels must be made of
To get a new manual, call
(800) 523-4777 or go to
oil-resistant material
www.grizzly.com.
178
187
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
Grizzly will not accept labels changed without approval. If
rk changes are required, contact us immediately at manuals@grizzly.com.
188
197
grizzly.com
REF PART #
177V2 P0513177V2 MACHINE ID LABEL V2.07.18
178 P0513178
179 P0513179
180 P0513180
181 P0513181
183 P0513183
184 P0513184
185 P0513185
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM!
-84-
Scan QR code to visit our Parts Store.

G0513 Labels

grizzly.com
186
G0513
MODEL G0513
• 1:1 Sizing (Labels are
17" 2 HP BANDSAW
actual size)
• Labels must be made of Specifications
oil-resistant material Motor: 2 HP, 110V/220V, 1-PH, 60 Hz To reduce risk of serious injury when using this machine:
Motor Prewired: 220V 1. Read & understand owner's manual before operating.
Amp Draw: 10A at 220V; 20A at 110V 2. Never touch moving blade—keep hands out of blade path.
Table Size: 17" x 17" 3. Always wear approved eye protection and respirator.
Blade Speeds: 1700 & 3500 FPM 4. Only remove jammed cutoff pieces when blade is stopped.
Blade Length: 131-1/2" 5. Use push stick or holding jig to cut small or narrow pieces.
Blade Width Range: 1/8" – 1" 6. Disconnect power before changing blades or adjusting.
Max. Cutting Width Left of Blade: 16-1/4" 7. Maintain adjustment of blade tension, tracking, & guides.
Max. Cutting Height: 12-1/8" 8. Keep upper guide adjusted to just clear the workpiece.
Table Tilt: 10˚L ⁄ 45˚R 9. Hold workpiece firmly against table to maintain control.
Weight: 266 lbs. 10. Only run saw with wheel covers closed & all guards in place.
11. Never reach under table while blade is in motion.
12. Secure/remove loose clothing and long hair.
Date
13. DO NOT expose to rain or use in wet locations.
14. DO NOT operate under influence of drugs or alcohol.
SN
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Mfd. for Grizzly in Taiwan
If
DESCRIPTION
ELECTRICITY LABEL
GLASSES/RESPIRATOR LABEL
READ MANUAL LABEL
DOOR WARNING LABEL
DISCONNECT POWER LABEL
GRIZZLY NAMEPLATE-SMALL
SAW TENSION LABEL
184
G0513 Series
Model G8588
• 1:1 Sizing (Labels are
actual size)
Generic Labels
• Labels must be made of
oil-resistant material
(7/12/13)
181
WARNING!
189
To reduce risk of death
G0513 Series
INJURY HAZARD!
• 1:1 Sizing (Labels are
or serious injury, read
manual BEFORE using Do not open door
actual size)
machine.
while machine is
To get a new manual, Generic Labels
connected to power • Labels must be made of
call (800) 523-4777 or
or blade is in motion.
go to www.grizzly.com. oil-resistant material
(7/12/13)
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a WARNING!
respirator when
To reduce risk of death
using this machine. INJURY HAZARD!
or serious injury, read
manual BEFORE using Do not open door
machine.
while machine is
To get a new manual,
183 connected to power
call (800) 523-4777 or
or blade is in motion.
go to www.grizzly.com.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
WARNING!
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
EYE/LUNG INJURY If
artwork changes are required, contact us immediately at manuals@grizzly.com. HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
G0513 Series
• 1:1 Sizing (Labels are
actual size)
Generic Labels
• Labels must be made of
oil-resistant material
(7/12/13)
181
WARNING!
To reduce risk of death
INJURY HAZARD!
or serious injury, read
manual BEFORE using Do not open door
machine.
while machine is
To get a new manual,
connected to power
call (800) 523-4777 or
or blade is in motion.
go to www.grizzly.com.
WARNING!
REF PART #
186 P0513186
187 P0513187
188 P0513188
189 P0513189
191 P0513191
195 P0513195
197 P0513197
G0513 Series Bandsaws (Mfd. Since 08/22)
185
DESCRIPTION
MODEL NUMBER LABEL
TOUCH-UP PAINT, GRIZZLY GREEN
TOUCH-UP PAINT, LIGHT GRAY
GUIDE POST ADJUST LABEL
BLADE TENSION SCALE LABEL
GUIDE POST LOCK LABEL
GRIZZLY.COM LABEL
195
178