Grizzly G0513 Series Owner's Manual page 6

Front Controls
A
C
Figure 3. Front controls
(G0513X2BF shown).
A. Blade Tension Scale: Displays blade tension
using numbers 1–8. For reference only—after
proper tension for particular blade has been
determined.
B. Blade Tracking Window: Allows you to
monitor blade tracking on the wheel without
opening the wheel cover.
C. Blade Tension Handwheel: Increases/
decreases blade tension (refer to Page 28
for more information).
D. Fence and Miter Gauge: Supports workpiece
for controlled straight or angled cuts.
E. Foot Brake (Model G0513X2BF): Quickly
stops bandsaw blade and turns motor OFF.
Motor Brake
The Model G0513X2BF has a motor brake that
activates and quickly stops the blade when the
OFF button is used or the foot pedal is pressed.
-4-
Rear Controls
B
D
E
F. Wheel Cover Lock Knobs: Secure the
wheel covers.
G. Quick-Release Blade Tension Lever:
Adjusts blade tension for quick blade changes.
H. Tracking Control Knob and Lock Lever:
Moves and locks upper wheel tilt for blade
tracking.
I. Table Tilt Controls: Adjusts table tilt and
locks the table in place.
J. Magnetic Switch: Provides thermal overload
protection for the motor.
K. Lower Wheel Adjustment Hub: Used when
adjusting coplanarity of the wheels.
L. Guide Post Handwheel and Lock Knob:
Quickly moves the upper guide post to the
desired height; locks setting.
F
L
F
Figure 4. Rear controls
(G0513X2BF shown).
G0513 Series Bandsaws (Mfd. Since 08/22)
G
H
I
J
K