Electronic Controller Bde-D (Option); Operating Modes And Behaviour Of The Door During Input Signals - Record DFA 70 User Manual

5.2

Electronic controller BDE-D (Option)

IMPORTANT
The following listed functions can only be checked after learning of running parameters or
after learning of CAN-sensors.
At the same time the addressing of CAN-sensors will be checked.
5.2.1

Operating modes and behaviour of the door during input signals

Table of signals (X marks a release reaction)
Explanation of the abbreviations see chapter Abbreviations
Automatic /
Normal operation. The door opens and closes automatically, either by triggering of an activation
device or by pushing the door, if the "touch control (push to active)" is active.
AKI
AKA
SSK
SIO
SIS
TIPP
Manual operation /
In this mode the operator works as a normal door closer. It is easy to open the door by hand and
closes automatically. The actuating devices connected are ignored.
One-Way /
In the One-Way traffic mode, people cannot enter the room from the outside, but can leave it from the
inside.
AKI
AKA*
SSK
SIO
SIS
TIPP
* AKA is active as safety device while closing
BAL_DFA_70_EN_1V0_REC_102-127109270
AUTO
CLOSED OPENING
X
X
X
X
HAND
EXIT
CLOSED OPENING
X
X
The BDE-D electronic controller is an easily operated
input and output device for the sontrol and adjustment of
door operators. Logically arranged pushbuttons allow
intuitive operation and navigation through the operator
specific menu. The LCD with backlight shows data and
information about the door status with symbols and text
messages.
Additional information can be found in the BDE-D
manual.
OPEN
X
X
X
X
OPEN
X
X
X
X
Operation
CLOSING
X
X
X
X
X
CLOSING
X
X
X
X
X
5
X
X
X
X
X
X
X
X
X
X
21 / 34