Table of Contents
Advertisement
After-Cleaning Care
Important: Clean and dry filter after use to maximize performance. Replace filter every 3 months.
1.
Empty the dirty water tank
following steps on page 5.
Rinse the tank.
4.
Rinse the float on the dirty
water tank cover.
7.
Hand wash with mild
detergent. Place in drying tray.
10.
Place brush into the right
side of the foot first. Press left
tab down to lock into place.
WARNING
electrical outlet before performing maintenance or troubleshooting.
6 global.BISSELL.com
2.
Remove the filter by holding
the sides and pulling up.
5.
Grab the front of the brush
window and pull up to remove.
8.
Wipe out the brush roll
chamber.
11.
Reinstall the brush roll
window by lining up tabs on
the edges of the foot.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
3.
Wash filter and screen
with warm water and mild
detergent.
6.
Remove the brush roll by by
pulling the tab.
9.
Leave all parts out to dry
before reassembling.
12.
Press the window back so
it clicks into place.
Advertisement
Table of Contents
