Page 1
GoVac U S E R ’ S G U I D E Model 3300, 3301, & 3302 Series Safety Instructions Product View Assembly 8-10 Operations / Maintenance Troubleshooting Replacement Parts Warranty...
Page 2
Your BISSELL GoVac is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Service Department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
BISSELL may cause fire, electric shock BEFORE USING YOUR GOVAC. or injury. WARNING: Use only the DC adapter supplied by BISSELL to To reduce the risk of recharge your GoVac. fire, electric shock, or injury: Use charger unit only in standard electrical Store indoors.
Page 4
Handle Grip Handle Assembly Charging Port Metal Indicator Extension Light Handle Charging Base (back View) D-Shaped Dust Cup Electrical Contact Post Charging Base Plug (Front View)
7. Place bottom D-shaped End into the D-shaped opening at the top of the BISSELL GoVac. Push firmly until the button at the bottom “clicks” into place in the opening. Position GoVac in Charging Base (if so equipped), mak- ing sure that the GoVac Charging Port fits securely over the Electrical Contact Post on the Charging Base.
Page 6
2 & 3 Indicator Light (depending Indicator Light Glows red when GoVac is Charging. on model) 3300 Series Indicator Light Glows green when GoVac is charged and ready for use. Charging Cord with DC Adapter Plug Transformer 3302 Series plugs into standard electrical outlet (120v - 60hz): plug opposite end into port on motor side of GoVac.
BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. — 10 p.m. ET Saturday 9 a.m. — 8 p.m. ET Or visit our website @ www.bissell.com NOTE: Charging Bases are not interchangeable between models.
Page 8
Tip back the Handle into typical use position and your BISSELL GoVac turns on by itself. To turn BISSELL GoVac off, return Handle to upright position. To clean stairs, vehicles or small areas, detach the...
To Empty your Filter Make sure that the BISSELL GoVac is in the “OFF” position. With BISSELL GoVac facing away from you, grasp Dust Cup in right hand and turn it toward you (toward the back of the BISSELL GoVac).
Check for red light on GoVac when it is in Charging Base Is GoVac correctly seated in Charging Base. Is cord completely connected at wall outlet. If suggested solutions for this or any function of the BISSELL GoVac do not correct the problem, call BISSELL Consumer Services.
Grand Rapids MI 49501 ATTN: Consumer Services Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of unit available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim.
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product, BISSELL Homecare, Inc. will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part.