Bissell CROSSWAVE 2210 Series Manual

Bissell CROSSWAVE 2210 Series Manual

All-in-one multi-surface cleaner
Hide thumbs Also See for CROSSWAVE 2210 Series:

Advertisement

CROSSWAVE®
ALL-IN-ONE MULTI-SURFACE CLEANER
1785, 2210, 3238, 3395 SERIES
Important Safety Instructions ................................ 2
What's in the Box? ......................................................... 2
Assembly ..............................................................................3
Filling the Clean Water Tank ..................................4
Cleaning Your Floors ...................................................5
Emptying the Dirty Water Tank ............................6
After-Cleaning Care ...................................................... 7
Storing Your Machine ................................................... 7
Troubleshooting ...............................................................8
Warranty ...............................................................................8
Product Overview
1. Hard Floor Mode Button
2. Area Rug Mode /
Clean Out Cycle Button
3. Solution Spray Trigger
4. Upper Handle
5. Quick Release™
Cord Wrap
6. Clean Water Tank
7. Integrated Carry Handle
8. Lower Cord Wrap
9. Dirty Water Tank Release
10. Dirty Water Tank
11. Brush Roll Window
Meet your new BISSELL® product!
Go to support.BISSELL.com for a comprehensive walkthrough
of your new purchase, including videos, tips, support, and more.
Want to get started right away? This guide has all the information
you need to set up your new product. Let's take a look...
1
3
2
5
4
7
9
10
11
6
8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CROSSWAVE 2210 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Bissell CROSSWAVE 2210 Series

  • Page 1: Table Of Contents

    Cord Wrap 6. Clean Water Tank Meet your new BISSELL® product! Go to support.BISSELL.com for a comprehensive walkthrough of your new purchase, including videos, tips, support, and more. Want to get started right away? This guide has all the information...
  • Page 2: Important Safety Instructions

    • Use only BISSELL® cleaning formulas intended for use with this • Do not use with damaged cord or plug. If appliance is not working as it appliance to prevent internal component damage. See the Cleaning should, or has been dropped, damaged, left outdoors, or dropped into Formulas section of this guide.
  • Page 3: Assembly

    Assembly Go to support.BISSELL.com for assembly videos. Insert handle into body of Align clean water tank with Wrap the cord around the machine until it clicks into the grooves on the back of the Quick Release™ Cord Wrap and place.
  • Page 4: Filling The Clean Water Tank

    Then add formula to the first formula fill line (2 fl. oz.). *Compatible BISSELL formulas include: Multi-Surface, Wood Floor, Area Rug, PET Multi-Surface with Febreze Freshness, Hard Floor Sanitize, Simply Multi-Surface Certain trademarks used under license from The Procter & Gamble Company or its affiliates.
  • Page 5: Cleaning Your Floors

    Cleaning Your Floors Visit support.BISSELL.com to watch additional how-to videos. Hard Floor To turn the machine ON, press Recline to start the brush Before each use, hold the the hard floor or rug button. roll spinning. Brush roll will not solution spray trigger for 10 spin when machine is upright.
  • Page 6: Emptying The Dirty Water Tank

    Emptying the Dirty Water Tank Go to support.BISSELL.com for a full list of how-to videos. Press the button on top of Hold the top of the tank Pour dirty water down the the tank, grab the front handle near the sides of the filter and sink and rinse the tank.
  • Page 7: After-Cleaning Care

    Storing Your Machine For more helpful maintenance tips, check out support.BISSELL.com. Store machine in a protected, dry area. Since this product uses water, it must not be stored where there is danger of freezing. Freezing will damage internal components and may void the warranty.
  • Page 8: Troubleshooting

    Remove the clean water tank and reapply the cap. Note: Any other servicing should be performed by an authorized service representative. Warranty Limited 2-year warranty may vary by state. Visit support.BISSELL.com or call 1-800-237-7691 for complete warranty information. Every Purchase Saves Pets ™...

This manual is also suitable for:

Crosswave 1785 seriesCrosswave 3238 seriesCrosswave 3395 seriesCrosswave 1785Crosswave 1785cCrosswave 1785d ... Show all

Table of Contents