After-Cleaning Care; Storing Your Machine - Bissell CROSSWAVE HYDROSTEAM Manual

After-Cleaning Care

For more helpful maintenance tips, check out global.BISSELL.com.
1. Remove brush roll following
steps on page 3. Pull brush roll
tab and place in tray to dry.
Check steam bar for clogs.
Wipe steam nozzle with cloth.
4. Remove filter from lid. Open
screen and remove debris.
7. Let parts air dry for 24
hours before next use.

Storing Your Machine

When finished using the product, wrap cord around cord wrap for storage. Store machine indoors in
a dry location in an area where the product is not likely to get damaged.
NOTICE
To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
WARNING
electrical outlet before performing maintenance or troubleshooting.
2. Remove machine from tray
and wipe excess water or dirt.
Do NOT rinse under faucet.
5. Wash filter in warm water
and mild detergent. Clean
and dry filter after each use.
Replace every 3 months.
8. Reinstall brush roll following
steps on page 3. Reinstall filter,
strainer, and tank lid.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
3. Empty dirty water tank and
strainer following steps on
page 6.
6. Rinse the bottom of the tank
cover to remove wet debris.
9. Insert bottom of tank first.
Pivot top toward the machine
until it clicks.
global.BISSELL.com 9