Table of Contents
Advertisement
After-Cleaning Care
For more tips on maintaining your machine, visit support.BISSELL.com.
1.
Turn OFF and unplug your
machine. Follow steps 2-3 on
page 7 to remove the dirty
water tank.
4.
Once steps 4-5 on page 7
are complete, ensure the dirty
water tank is empty by gently
removing and unscrewing the
ring at the bottom of the tank.
7.
To replace the nozzle, align
top into channel in front of red
filter and press in place.
WARNING
electrical outlet before performing maintenance or troubleshooting.
8 BISSELL.com
2.
Grab the top of the nozzle
and pull it up and away from
the machine. Rinse or wipe
it clean. Use a cloth to wipe
debris from the red filter.
5.
Clean and rinse debris from
the float. Keeping the float
clean prevents the dirty water
tank from overflowing and
ensures the seal stays intact.
8.
Use both hands to push the
bottom of nozzle into place.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
3.
Use cloth to wipe clean.
6.
Once clean, assemble by
aligning the arrow on the float
with the notch on the tank.
Then, return the ring and twist
to lock. Make sure it's fully
aligned, so water doesn't leak.
9.
Once dirty water tank is dry,
align the bottom of the tank to
the base and secure into place
with latches.
Advertisement
Table of Contents
