After-Cleaning Care - Bissell TURBOCLEAN DUALPRO PET Manual

After-Cleaning Care

Visit support.BISSELL.com for additional how-to videos on maintaining your machine.
1.
Turn OFF and unplug the
machine.
4.
Return the nozzle to the
Foot of the machine. Line up
the two hooks on the nozzle
to the bottom of the foot.
Cleaning the Brush Roll
1.
Turn OFF and unplug the
machine.
WARNING
electrical outlet before performing maintenance or troubleshooting.
2.
Remove the nozzle from the
foot by lifting up on the back
of the Accessory Hose Door
to open.
5.
Rotate the nozzle down and
click into place.
2.
Lay the machine down on
its back or side.
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from
3.
Hold the nozzle and insert
the Nozzle Clean Out Tool into
the thin slot at the front of
the nozzle where it touches
the floor. Clean out pet hair or
debris.
6.
Close the Accessory Hose
Door.
3.
Use the comb to remove
debris or hair from the brush
rolls.
CONTINUED ON NEXT PAGE
BISSELL.com 9