Best Sleep Operation; Maintenance - Sharp AH-X10 Series Operation Manual

BEST SLEEP OPERATION

For more comfortable sleep, temperature
and fan speed will be controlled automati-
cally by the best program.
1
During operation, press the BEST
SLEEP button.
• The remote control will display " ".
• Temperature and fan speed will be con-
trolled automatically for the best sleep.
TO CANCEL
Press the BEST SLEEP button again.
CEL
NOTE:
• BEST SLEEP operation is not available in
DRY and FAN mode.
B129_EN.indd 9

MAINTENANCE

Be sure to disconnect the power cord from
the wall outlet or turn off the circuit breaker
before performing any maintenance.
CLEANING THE FILTERS
1
Turn off the unit.
2
Remove the filters.
Lift the open panel.
Pull the air filters down to remove them.
3
Clean the filters.
• U se a vacuum cleaner to remove dust. If the
filters are dirty, wash them with warm water
and a mild detergent. Dry filters in the shade
before reinstalling.
4
Reinstall the filters and close the
open panel.
CLEANING THE UNIT AND THE
REMOTE CONTROL
• Wipe them with a soft cloth.
• Do not directly splash or pour water on them. It
can cause electrical shock or equipment damage.
• Do not use hot water, thinner, abrasive powders
or strong solvents.
MAINTENANCE AFTER AIR
CONDITIONER SEASON
1
Dry the inside of the indoor unit
thoroughly by taking the following
steps.
• R un the unit in the FAN mode with high
fan speed for 3 hours.
1
2
Stop the operation and unplug the
unit.
• T urn off the circuit breaker, if you have one
exclusively for the air conditioner.
3
Clean the filters, then reinstall them.
MAINTENANCE BEFORE AIR
CONDITIONER SEASON
1
Make sure that the air filters are not
dirty.
2
Make sure that nothing obstructs
the air inlet or outlet.
EN-9
2021/11/10 14:27:26