Push Button - D-Link DES-1100-10MP Manual

PoE output power capacity

4. Push Button

Function
Factory Default Inner Push Button,
Front Panel
LED ON/OFF Push Button,
Front Panel
Maximum output: 30Watt per port.
1. Support PoE and PoE+. (IEEE 802.3af /at standard.)
2. Automatically discover the connection of PD device.
3. Automatically disable port if the port current is over 720mA.
4. Via Web setting, working mode of each port can be configured.
5. When port is in the Auto mode, output port power limit will be
associated with PD Classification Value.
6. Priority of POE port is configurable. (Default setting is lower port No.
higher priority.)
7. Follow the standard PSE pin-out standard of Alternative B.
8. The maximum power used by power devices is defined by the following
classification. When Port works in Auto Mode, the output port power
limit will be associated with PD Classification Value.
Class
0 Default
1 Optional
2 Optional
3 Optional
4 Optional
Location
Pin the inner button 3 seconds then release, will reset
system configuration back to factory default.
Push once will turn off all functioning LEDs except Power
LED. Push again, turn on all functioning LEDs.
D-Link Web Smart Switch User Manual
Usage Minimum Power
Levels Output at
the PSE
15.4W
4.0W
7.0W
15.4W
30W
Description
29
Maximum Power
Levels at the
Powered Device
0.44 to 12.95W
0.44 to 3.84W
3.84 to 6.49W
6.49 to 12.95W
12.95W to 25.5W