Reset Button; Keyboard Hot Key Commands - D-Link DKVM-8E User Manual

Display LED Indication
You can press the button in order like mentioned-above
diagram. When you select one of eight PC ports and this
PC is shut down or this PC port is disconnected to the PC,
the display LED of selected port will flash. When you
select one of eight PCs ports and this PC is powered on,
the selected port LED is lit.

Reset Button

To press select and bank button of bank 1 (master)
simultaneously can reset KVM switch. This reset action will
not only return KVM switch back to initial state --- Check
the password, but also re-check all of slave banks which
connected to mast DKVM-8E.
If you add a new DKVM-8E as a slave bank, please use
reset button of master DKVM-8E to assign a new ID to it.
You can view this new slave bank go through OSD menu.
With reset command, the PC ports of DKVM-8E will not be
reset. Only power off DKVM-8E can reset PC ports.

Keyboard Hot Key Commands

You can also conveniently command DKVM-8E by
switching ports through simple key sequences. To send
commands to DKVM-8E, the "SCROLL LOCK" key must
be pressed twice within 2 seconds. You will hear a beep
for confirmation and the keyboard is in hot key mode. If
you have not pressed any key in hot key mode within 2
seconds (It means to key in any key follows up "Scroll
- 12 -