Springfree SF80 Assembly, Installation, Care, Maintenance, And Use Instructions page 20

WARNING: The Springfree™
Trampoline has the industry's highest
weight to area ratio. However, in
extreme wind conditions the large
surface area of the mat can capture
enough wind energy to result in
the trampoline being lifted from
its installation location. Owners
of trampolines installed in areas
susceptible to high winds, or owners
who wish to anchor their trampoline as
a result of this warning should consider
applying some type of anchoring
system to the base of the trampoline
legs.
20
Springfree™ Trampoline Model SF80 Trampoline and Enclosure Assembly, Installation, Care, Maintenance and Use Instructions Version 1.0
Recommended Step: Use sandbags
for increased stability
For increased stability, your trampoline comes
with four sandbags, which you ill with sand and
place over each leg (sand not included).
Fill the bag to approximately 6 inches (150
mm) below the top with wet or dry sand (Figure
22-A).
Fold the top of the bag twice over such that
the Velcro strips meet (Figure 22-B).
Place one sandbag over each trampoline leg
on the straight edge of the trampoline such
that it cannot slip of (i.e. the stitched seam in
the center should lay over the leg tube). (Figure
22-C).
Figure 22-A: Filling the sandbag
Figure 22-B: Folding and sealing the sandbag
Figure 22-C: Placing the sandbag over the leg
150 mm