Turning The Unit Off And On; Switching Between Video Sources; Playing Two Videos Or Games At Once; Changing The Video Output Mode - Clarion VMA 5894 VMA5894 VMA5894 Owner's Installation Manual

Each setting has 30 steps of adjustment range and is
preset at the factory to 15.
Once you've adjusted the picture, wait a moment and the
adjustment menus disappear.

Turning the unit off and on

Press at any time to turn the unit off.
POWER
When you turn the vehicle's ignition off, the monitor automati-
cally shuts off.

Switching between video sources

If your vehicle has two video sources, for example, a DVD
player and a game console, you can easily switch between
them.
1. Press .
SOURCE
The monitor displays AUX1.
2. Press again to select AUX2.
SOURCE
Note:
If you're using only one video source, the screen remains
dark when you select the unavailable source.
10
VMA5894 and VMA7194

Playing two videos or games at once

If your vehicle is equipped with two LCD monitors in the
headrests and two video source units, two different videos or
games can play at the same time.
Each monitor transmits the infrared audio signal over its own
channel, A or B. When a vehicle has two monitors, the default
is to configure the monitor in the driver's headrest to use IR
channel A, and the monitor in the passanger's headrest to use
IR channel B. You can change this.
1. Press PICTURE several times to locate the IR CH option.
2. Press plus (+) or minus (+) to alternate between A and B.
Note:
You don't need to select the IR channel if your vehicle has
only one monitor or only one video source.

Changing the video output mode

1. Press PICTURE several times to locate the VIDEOSYS
option.
2. Press plus (+) or minus (+) to alternate between NTSC and
PAL.