Installation - Intermec MaxiScan 2220 Getting Started Manual

Introduction
Use this Getting Started Guide to set up the MaxiScan 2220 for most terminal connections
and symbologies. If necessary, use the EasySet setup software for additional configuration
possibilities and terminal connections.
Basic setup
Configuración básica
Configuration de base
Grundkonfiguration
Configurazione di base
Configuração básica
Full setup
Configuración completa
Configuration complète
Vollständige Konfiguration
Configurazione completa
Configuração completa
Operating
Uso
Utilisation
Betrieb
Utilizzazione
Operação
Getting Started Guide
EasySet setup software
(on the CD-ROM)
Operator's Guide
2

Installation

To change the cable connector from a horizontal (default) to a vertical position:
Remove the connector carefully in order
to avoid damaging the ribbon cable.
Start basic setup
2 scan lines to read setup codes
3