Table of Contents
Advertisement
XI.
Maintenance and Cleaning
Please operate and maintain the instrument properly and in accordance with this
manual's instructions so, that it remains in a good working state, which can extend the
service life of the instrument.
During a routine service, keep the product dry and clean, removing spilled liquid quickly,
clean the outer surface with a non-grinding cleaner, and do not connect the power
supply until all surfaces are dry.
If liquid or moist solid enters the instrument, please disconnect the power supply quickly
and leave off, and contact a service technician, or the manufacturer / supplier for more
advice.
The power supply must always be disconnected before any cleaning and or
maintenance work commences and please use the recommended cleaning methods for
this instrument. When cleaning the instrument, please wear applicable PPE and
protective gloves.
Always keep the internal and external of the water tank clean.
To prevent chemical reactions, NEVER wipe the outer shell with any chemical solutions.
When the instrument is not to be used for a long period, cover with a plastic dust shroud
and place into a dry room to prevent the temperature control instrument from moisture.
Cautions:
This instrument cannot be cleaned with chemical solutions.
Prior to an instrument repair the instrument must be cleaned while the contamination of
hazardous substances must be avoided, and the instrument must be put back into the
original packaging box for shipping.
When the instrument is not used for a long period please store with a dust cover, the power
'Off', in a dry, clean, level and stable place at normal temperature.
Version 1.0
User Manual
20
Advertisement
Table of Contents
