VIII. Operating Instructions
8.1
Display introduction
① TEMP area (PV): Showing measured temperature.
② SET area(SV): Showing set temperature.
③ Heating Lamp: It lights up when it has heat output.
④ TIME: Time display window, it will display running time or parameter value.
8.2 Command Key's Introduction
A
Used for setting parameters, the parameter setting mode could be quit by
pressing the set button for more than 3 seconds or more.
B
Used for moving the digits of setting value, internal parameters and checking
ambient temperature.
C
Used for setting value, modification of various parameters, or start / stop auto-
tuning.
D
Used for modifying set value, internal parameters or to check the remaining
period.
E
Press it for 3 seconds for operating or stopping the controller
Version 1.0
④
①
②
③
A
B
C
D
User Manual
E
13