9.2
Other Parameters Function in Menu
Below are the passwords and access sequence to various parameters/ functions:
PASSWORD
FUNCTION /
PARAMETER
0000
0003
Whilst the oven arrives pre-calibrated from the factory, certain adjustments may be
necessary for optimal performance.
Please Note: Adjustments will affect your oven settings!
It is highly recommended to writing down all factory settings prior to any adjustment so
they may be reset in the event of undesirable operation.
Version 1.0
dy
Delay of heating cycle start
tm
Safety temperature limiter for samples protection
Po
Restart mode after absence of power supply
AL
Temperature range for over temperature alarm
Pb
Temperature offset on single point
PK
Temperature offset on the entire ramp
PA
Temperature offset of the room temperature probe
User Manual
DESCRIPTION
18