Using the Batteries
The PB42/PB42c uses lithium-ion 2400 mAh batteries
(Model 318-015-001) for power. You can operate the
PB42/PB42c with one or two batteries installed. You must fully
charge the batteries before you can use the PB42/PB42c. Fully
charged batteries can last for up to one week without needing to
be recharged.
Use Intermec battery pack model 318-015-001 only. Use of
another pack may present a risk of fire or explosion.
The battery pack used in this device may present a fire or
chemical burn hazard if mistreated. Do not disassemble, heat
above 100°C (212°F), or incinerate.
Dispose of used battery packs promptly. Keep away from
children.
Installing the Batteries
Make sure you fully charge the batteries before you use your
PB42/PB42c. You can charge the batteries before or after you
install them into the PB42/PB42c. You can use one battery to
power the PB42/PB42c, but you may experience reduced
performance.
To install the batteries
1 Pull and hold the battery cover latch firmly toward the front
of the printer and lift up on the battery cover.
16
PB42/PB42c Portable Receipt Printer User's Guide