Cleaning The Printer - Intermec PB42 User Manual

To cold boot the PB42/PB42c
1 Disconnect the PB42/PB42c from the power source if
externally powered.
2 Remove the batteries from the PB42/PB42c for at least one
second.
3 Insert the batteries back into the PB42/PB42c.
4 Reconnect external power if powered externally.
5 Press the Feed button several times.

Cleaning the Printer

To properly maintain your PB42/PB42c, you should clean it at
the recommended intervals.
To avoid possible personal injury or damage to the printer,
never insert any pointed or sharp objects into the printer.
Use only cleaning agents specified next. Intermec is not
responsible for damage caused by any other cleaning
materials used on this printer. Clean the printer with a
cotton swab saturated with alcohol.
Paper
sensor
PB42/PB42c Portable Receipt Printer: Identifying the parts of the
PB42/PB42c to clean regularly.
PB42/PB42c Portable Receipt Printer User's Guide
Tear bar
Printhead
Platen
roller
35