Pairing For Stereo Mode - Philips 8000 Series User Manual

•
When the speaker is used as a
conference speakerphone, press
to mute the microphone of the
speaker. The backlights of all keys on
the speaker turn solid red, but you
can still hear the caller through the
speaker.

Pairing for stereo mode

Two identical conference speakers
(Philips AECS8100) can pair with each
other for stereo sound.
12 EN
1
Press and hold
simultaneously to enter the Stereo
Pairing mode. The backlight of the
Stereo Pairing key blinks white.
2
Once successfully paired, a prompt
tone will be heard from the speaker.
The backlight of the
Pairing key on both the master
and slave speakers turns solid. The
backlight of the
the master speaker turns white. The
backlight of the
the slave speaker turns solid red.
3
After stereo pairing is successful,
press and hold
to exit the stereo mode. The
backlight of the
key blinks red and white alternately
three times and then returns to the
current status.
4
Operations on the slave speaker are
the same as on the master speaker:
•
Press to pause and resume
playback.
Press Volume +/- to increase or
•
decrease the volume.
•
Press and hold
track.
5
In Stereo Pairing mode, when the
master speaker or the slave speaker is
used as a conference speakerphone,
the backlight of the
the slave speaker remains in red.
Note
•
The speaker will exit Stereo Pairing mode if not
successfully paired in 60 seconds.
on both speakers
Stereo
Bluetooth key on
Bluetooth key on
on either speaker
Stereo Pairing
to skip to next
Mute key on