Pairing For Stereo Mode (Tws) - Philips 4000 Series User Manual

Pairing for stereo mode
(TWS)
Two speakers can pair with each other
for stereo sound.
Note
•
TWS is worked only if there are two identical
party speakers (Philips TAX4207).
Select master speaker manually
1
Press and hold
power on both speakers and enter to
Bluetooth pairing mode.
» The LED indicator (LED3) on both
speakers blink blue.
2
Select one speaker as master and
connect to Bluetooth.
» LED3 on master speaker turns
solid blue once Bluetooth is
connected.
3
Press and hold
both speakers for 3seconds to enter
stereo pairing mode (TWS).
» LED3 blinks blue and white
alternatively on both speakers
4
When TWS is connected, you will
hear a voice prompt.
» LED3 turns solid blue on both
speakers.
5
To exit TWS, press and hold
button on either speaker.
Select master speaker automatically
1
Press and hold
seconds to power on both speakers.
» The LED indicator (LED3) on both
speakers blink blue.
2
Press and hold
both speakers for 3 seconds to enter
stereo pairing mode.
key for 3 seconds to
(TWS) button on
(TWS)
touch key for 3
TWS button on
» The rst speaker entered TWS
mode is master and LED3 on
master speaker turns sold blue.
» The volume level, play/pause
state, light mode in slave speaker
will sync from master speaker
after TWS connected.
3
To exit TWS, press and hold
button on either speaker.
Note
•
During TWS pairing mode, both master and
slave speaker will return to previous state
automatically after 1 minute without user
operations or TWS pairing is not successful.
TWS playback operation
When TWS is connected, the slave
speakers will synchronize from master
speaker of below functions.
• Light effect
• Volume level
• Play/pause
• DBB (bass) level
Key & Operate
Press key on
either speaker
Press VOL + / － key
on either speaker
Press DBB key on
either speaker
Press and hold key
on either speaker
for 3 seconds
Press and hold key
on either speaker
for 3 seconds in
standby state
Press key on
either speaker
(TWS)
Action
Select Play/pause
the music on both
speakers
Increase or
decrease volume
on both speakers
Change DBB setting
on both speakers
Power off both
speakers
Power on selected
speaker and enter
TWS reconnection
Change light mode
in both speakers
EN 13