Philips BT7500
Play from Bluetooth device
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the speaker.
Note
•
The speaker synchronizes its volume with the
connected Bluetooth devices which support volume
sync function.
•
Bluetooth devices with iOS or Android 4.4 or higher
support sync function.
Enter Bluetooth pairing mode
Press and hold PAIRING for two seconds when
the speaker is in standby mode or AUDIO IN
mode.
EN
8
2s
Disconnect the Bluetooth-
enabled device
•
Disable Bluetooth on your device; or
•
Move the device beyond the
communication range.
» The LED indicator flashes.
To clear the Bluetooth pairing history:
Press and hold PAIRING for more than 7
seconds.
Connect a fourth Bluetooth
device
The product can connect a maximum of 3
Bluetooth devices simultaneously. If you try to
connect a fourth device with this product, you
may need to press and hold PAIRING for 2s,
then an idle device that is connected earlier will
be disconnected to enable 4th device to pair
and connect.