Table of Contents
Advertisement
Pairing for stereo mode
Two identical wireless speakers
(Philips S7807) can pair with each other
for stereo sound.
Note
• Any speaker can be used as the primary
speaker.
• The speaker connected to a Bluetooth
device can only be used as the primary
speaker.
• Before stereo pairing, make sure that the
secondary speaker is under Bluetooth
pairing mode.
• Keep a maximum distance of 20 meters
(66 feet) between the speaker and your
Bluetooth device.
• In stereo mode, the button operation on
the secondary speaker is as same as that
of the primary speaker.
1
Press
to power on both speakers,
and they will enter Bluetooth pairing
mode automatically. The speaker
connected to your Bluetooth device
will be used as the primary speaker.
2
On both speakers, press and hold
to enter stereo pairing mode until
the LED blinks red and white
alternatively. You will hear a prompt
sound when successfully connected
and Power/Bluetooth LED is solid
white.
3
Press
on either speaker. The
music will be played through both
speakers.
To exit the stereo mode, press and hold
the
on either speaker.
5 Product
information
Note
• Product information is subject to change
without prior notice.
General information
USB port
Built-in Lithium battery 7.4V, 5000mAh
Dimensions (W x H x D) 280 x 104 x 104 mm
Weight (main unit)
Operation Ambient
IP protection class
*The IP67 rating means the speaker driver is
dust tight and can be submerged for up to
30 minutes at a depth of up to 1 m.
Ampli er
Output power (RMS)
Frequency response
Signal to noise ratio
Speaker
Impedance
Maximum input power 15 W
Drivers
Passive radiators
Bluetooth
Bluetooth version
Frequency range
Maximum
transmition power
Compatible
Bluetooth pro les
Bluetooth range
5V
3A
1896 g
0 ℃~45 ℃
IP67*
40 W
60 Hz - 20 KHz
> 75dB
4
2 x 71 mm drivers
2 x 31 mm tweeters
2
5.2
2402 - 2480 MHz
< 10 dBm
HFP V1.7
up to 20 m
EN
7
Advertisement
Table of Contents
