Intermec EasyCoder 501 SA Installation Instructions Manual page 6

EasyCoder 401/501 – Installation Instruction
PAPER CUTTER KIT, cont'd.
Step-by-Step Instructions,
cont'd.
CAUTION!
Do not open the cutter while the
power is on!
Put back the power cord and switch on power. The cutter will
perform an idle cycle in order to occupy its home position.
Switch off the power again.
Tilt down the cutter and thread the paper through the cutter unit
between the guide plates.
Tilt up the cutter again and lock it in closed position. Make sure
the printhead is lowered, close the right-hand door and switch on
the power. Now the printer is ready for operation.
5