EasyCoder 401/501 – Installation Instruction
PAPER CUTTER KIT, cont'd.
Step-by-Step Instructions,
cont'd.
LTS
Disconnect the LTS cable from connector P-606 at the upper
front corner of the CPU board.
EPROM
FLASH
-
+
Loosen the #T10 Torx screw that holds the LTS bracket to the
front of the print unit and remove the LTS assembly. Be careful
not to damage the cable – you may want to put back the LTS later
or use it in another printer (it fits all EasyCoder 401/501/601
printers).
Put back the left-hand cover plate.
Disconnect LTS Here!
040700.10
#T10 Torx Screw
POWER ON
P-606
Continued!
3