External Cleaning - Intermec EasyCoder 401 User Manual

Intermec EasyCoder 401 Linerless – User's Manual

EXTERNAL CLEANING

1 2
Wipe external surface with a soft cloth moistened with
Always remove the power cord before cleaning! water and, if necessary, a mild detergent.
3
4
Never use any sharp tools for removing stuck labels.
Never spray the printer. Protect the printer from water
The printhead and the print roller are easily damaged.
when cleaning the premises.
IMPORTANT!
It is recommended to clean all surfaces in contact with the paper, including the
rubber roller, from adhesive residue at an interval of max. 3 km of paper feed
(corresponds approximately to 20 full size paper rolls). Use a cleaning card or a lint-
free cotton swab or cloth soaked with isopropyl alcohol.
14