Battery Recycling Information; For Users Outside Of Canada Or The United States; European Union Compliance; Additional Emi/Rfi Compliances - Intermec EasyCoder 3600 User Manual

Intermec easycoder 3600: user guide

Hide thumbs Also See for EasyCoder 3600:

Table of Contents

Available languages

This product contains a Lithium memory backup battery. When the batteries or the

product reaches the end of its useful life, the spent batteries should be disposed of by

a qualified recycler or hazardous materials handler. Do not mix these batteries with

the solid waste stream. Contact your Intermec Technologies Service Center for

recycling or disposal information.

Place this supplement in your manual.

This product complies with EN 55022, EN 50082-1, and EN 60950 as required by the

EMC Directive 89/336/EEC as amended by 92/31/EEC and by the Low Voltage

Directive 73/23/EEC as amended by 93/68/EEC.

This device meets the Class B limit requirements of CISPR 22.

This device complies with the Australian EMC Framework as required by AS/NZS 3548.

Note: This product, tested in its base configuration, complies with the emission limits of FCC Part 15 Class B

as well as CISPR 22 Class B, as mentioned above. However, the user should be aware that when this product

is used with some accessories, it may only be compliant with Class A limits of both standards.

This product is UL listed (UL 1950), CSA Certified (C22.2 #950) and TÜV GS Licensed (EN 60950) for

safety.