Related Manuals for Wali GSDM003
Summary of Contents for Wali GSDM003
- Page 1 Monitor Desk Mount 27” GSDM003 75x75/100x100 (1.5~7kg)x3 (3.3~15.4lbs)x3 RATED support@walielectric.com...
- Page 3 Supplied Parts List Pole Base VESA Plate C-Clamp Brace A(x1) B(x1) C(x1) D(x3) E(x1) C-Clamp Décor Cover Bolt Support Plate Anti-skid Pad Support Plate F(x1) G(x1) H(x1) I(x1) J(x4) K(x1) Washer Top Screw M6x10 Bolt M6x12 Bolt M6x16 Bolt L(x1) M(x1) N(x3) O(x2)
- Page 4 Step 1 Fit clamp: 0.4”-3.3” Grommet: 0.4”-3.1” Step 2 Place the Pole onto the top hole of Base ,connect Pole and Base from the bottom using M6x16 Bolt tighten with Allen Key 4mm Step 3 Option A Clamp Installation 1. Connect C-Clamp Brace to Base from the bottom using M6x12 Bolt and tighten with Allen Key 4mm...
- Page 5 Step 3 Option A Clamp Installation 2. Select the preferred height firstly and connect C-Clamp to C-Clamp Brace using M6x10 Bolt and tighten with Allen Key 4mm 3. Put on the Décor Cover to cover the C-Clamp Brace , rotate the knob clockwise to fasten for stability.
- Page 6 Step 3 Option B Grommet Base Installation 1. Guide Support Plate through Bolt and connect them to Base from the bottom using M6x12 Bolt tighten with Allen Key 4mm . Tear off the protect paper to attach Anti-Skid Pad to the bottom designated position of Base as image shown.
- Page 7 Step 3 Option B Grommet Base Installation 2b Self-drilled Grommet Hole Installation Mark the position of the hole on your mounting surface.Drill a 3/8"(10mm) diameter hole at the marked position through the mounting surface.Insert the assembled Pole through the desk hole, guide the Support Plate ,Washer and Nut through the Bolt...
- Page 8 Step 5 Put the ARM through the Pole , adjust the preferred height and tighten using Allen Key 6mm Step 6 Step 6.1 Step 6.2 Select TV Screws Select Spacers ( if needed )
- Page 9 Step 6 Step 6.3a Step 6.3b Select M4x12 Bolt or M5x12 Bolt Select M4x16 Bolt or M5x16 Bolt according to your TV/Monitor,connect VESA Plate according to your TV/Monitor,connect VESA Plate together with D5 Washer into the mounting together with D5 Washer and Spacer into holes on the back of TV/Monitor, tighten with...
- Page 10 Step 8 Press the Arm on horizontal level as image shown, adjust gas spring tension to your personal preference using Allen Key 6mm , adjust the tilt tension using Allen Key 6mm For Heavier Monitors For Lighter Monitors Step 9 Slide the bottom two cable slot covers towards the VESA plate direction to detach it off the arm, slide and lift the four corners of the top cable slot cover to detach it off.
- Page 11 Step 10 Guide the cable through the cable slot and put the cover back to arm. Step 11 Manually swivel,tilt or rotate the angle for the best operating environment; Store the Allen Key 4mm and Allen Key in the holder of Décor Cover for future convenience.
- Page 12 We support the technology that brings your home to life. We offer high quality products, professional customer service, and extensive technical support. If you have any questions,please contact us. support@walielectric.com 1-844-SATTLER (18447288537)