Page 3
Supplied Parts List VESA Plate C-Clamp Brace C-Clamp M6x10 Bolt A (x1) B (x2) C (x1) D (x1) E (x2) M6x12 Bolt Metal Pad Bolt Support Plate F (x3) G (x1) H (x1) I (x1) J (x1) Allen Key 4mm Allen Key 5mm M4x12 Bolt M5x12 Bolt...
Page 4
2. Select the preferred height firstly and connect C-Clamp to C-Clamp Brace using M6x10 Bolt and tighten with Allen Key 4mm Option B Grommet Base Installation 1. Attach Metal Pad & Bolt to the bottom of Arm using M6x12 Bolt , tighten up with Allen Key 4mm...
Page 5
2a Existing Grommet Hole Installation 2b Self-drilled Grommet Hole Installation If the existing grommet hole comes with a plastic protector, Mark the position of the hole on your mounting surface. Drill remove it to ensure a flat surface before installing the desk a 3/8"(10mm) diameter hole at the marked position through mount.
Page 6
Step 3 Put the assembled TV/Monitor onto the Arm and ensure the stability, tighten the VESA plate using Top Screw. Step 4 Press the Arm on horizontal level as image shown, adjust gas spring tension to your personal preference using Allen Key 5mm , adjust the tilt tension using Allen Key 5mm Adjust the Gas Spring Tension...
Page 7
Step 5 Step 6 Screw out the bolts and take off the cable cases with Allen Guide the cables through and put the cable cases back. Key 5mm Step 7 Manually swivel, tilt , and rotate the monitor for the best viewing angle. +75°...
Page 8
We support the technology that brings your home to life. We offer high quality products, professional customer service, and extensive technical support. If you have any questions,please contact us. 1-844-SATTLER (18447288537) support@walielectric.com www.walielectric.com...