HOMCOM 824-006V90 Assembly Instruction Manual page 15

2. POWER
Turn the FAN off by pressing the 'POWER' button again.
3. SPEED
low, medium, or high by pressing 'SPEED' . The speed setting is
displayed on the LED panel (shown in FIGURE 4) ...
4. MODE
NORMAL
mode
- NORMAL Mode
up.
- NATURAL Mode
middle speed(15s) and low speed(15s), it works as per this recycle.
- SLEEP Mode
work at high speed at 30 mins, then transfer to middle speed at 30
mins and transfer to low speed until fan stop working.
- Child Mode
oscillation function will start, Ionizer function will start(if has). And it
will work at high speed at 15 minutes, transfer to middle speed at 15
minutes, then transfer to low speed until it take off. You can take off
oscillation function by manual.
5. TIMER
: Turn the FAN on by pressing the 'POWER' button;
: You can adjust the fan speed to the desired level:
: Pressing the ' MODE' button will set the FAN into
mode, NATURAL mode , SLEEP mode
: fan will start work at any speed you set
:fan will start work at high speed(15s),
: if you set the mode at high speed, fan will
: Fan will auto. Set up timer at 3 hours,
: The fan is equipped with a timer that allows you to
-15-
and Child