Page 1
INcjd020V01_UK 824-003_824-004_824-005 TOWER FAN 220-240V~50/60Hz 45W READ AND SAVE THIS INSTRUCTION FOR FUTURE USE ASSEMBLY INSTRUCTION...
Page 2
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND.OTHER BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! IMPORTANT SAFETY INFORMATION Read all instructions carefully before using the FAN. Use this FAN only as described in this manual.
Page 3
WARNING : The Main Power Switch and the On/Off switch should not be used as the sole means of disconnecting power. Always unplug the power cord before servicing or moving the unit. 14. Always disconnect the fan from the power supply when moving it from one location to another.
Page 4
PARTS NAME ASSEMBLY The base of the tower fan comes in two parts, which fit around the oscillation base. Both parts fit easily together. The back half is the one with cut-outs for the power supply cord. First attach the front half of the base, aligning the holes in base with the screw holes in the oscillation base, and leading the power cord through the centre hole.
Page 5
(Figure 1) Thread the power supply cord through the two cut-outs at the bottom of the base. REMOTE CONTROL 1. Included a button cell battery (the type of battery CR2025). The Remote Control Power button is labeled as such. All the functions performed with the Remote Control work identically to the Manual Controls.
Page 6
(FIGURE 3) 1. Place the FAN on a stable flat surface. Plug the cord set into a 220-240V~A.C. electrical outlet. 2. POWER: Turn the FAN on by pressing the ‘POWER’ button; Turn the FAN off by pressing the ‘POWER’ button again. 3.
Page 7
9.DISPLAY LED- can be switched off temporarily by pressing the DISPLAY button on the remote control or by pressing and holding the MODE button on the control panel from more than 3 seconds,the display will light up again once any control button is activated. 834-003 FIGURE 4 834-004/834-005...
Need help?
Do you have a question about the 824-003 and is the answer not in the manual?
Questions and answers