Booting The Cn2G; Warm Booting The Cn2G - Intermec CN2G User Manual

Booting the CN2G

You seldom need to warm or cold boot the CN2G. The CN2G
uses the configuration currently saved in flash memory during
the boot process.
You need to boot the CN2G when an application is locked up
and will not respond, when you upgrade the firmware, or when
you reflash the computer. The next instructions explain how you
warm and cold boot the CN2G.

Warm Booting the CN2G

If your charged CN2G does not resume after pressing the Power
key, or if the computer or an application is locked up, you may
need to warm boot it.
To warm boot the CN2G using the Warm Boot button
• Using the end of the stylus, press the Warm Boot button
inside of the stylus holder.
Wa
Boo
but
The screen goes blank immediately. The screen remains blank
for a few seconds, the Refreshing the File System dialog box
appears, and the CN2G warm boots.
CN2G Handheld Computer User's Manual
Chapter 4 — Troubleshooting and Maintaining the CN2G
73