Intermec CN2G User Manual page 30

Chapter 1 — Using the CN2G Handheld Computer
Remove the battery and set it aside.
6
Pull the tab attached to the SD card toward the bottom of the
7
CN2G.
Remove the SD card from the CN2G.
8
To insert the SD card
Before inserting the SD card, you must attach one of the
1
pull-tabs that ships with the CN2G. An SD card without a
pull-tab can be very difficult to remove.
Align the SD card as shown in the next illustration, and insert
2
the SD card into the slot.
Align the battery contacts as shown in the next illustration,
3
and insert the battery in the battery compartment. Press
down on the battery until it clicks into place.
18
rd
Tab
SD Card
Tab
SD card
Tab
CN2G Handheld Computer User's Manual