Advertisement
■ STATUS
Bit 0 to 7: Analog output module shows '0' at the same address.
Bit 8 to 10: Shows the power supply status.
15
Power supply
0 : Normal
TRANSMISSION DATA DESCRIPTIONS
■ BASIC MODULE
Transmitted data (word) depends upon the modules types.
OUTPUT DATA*
MODEL
(R7D to Master)
R7D-YS2x
■ EXTENSION MODULE
Transmitted data (word) for the extension module is added.
OUTPUT DATA*
MODEL
(R7D to Master)
R7D-EAx
R7D-ECx
■ STATUS
Status signal can be included in the transmission data
when the setting is enabled using the PC Configurator soft-
ware (model: R7CON). For details, refer to "STATUS in I/O
DATA DESCRIPTIONS".
OUTPUT DATA*
STATUS
(R7D to Master)
Enabled
Disabled
*1. Output Data means those sent to the master.
*2. Input Data means those received from the master.
0
1 : Error
INPUT DATA*
1
2
(Master to R7D)
0
2
1
INPUT DATA*
2
(Master to R7D)
1
0
0
1
INPUT DATA*
1
2
(Master to R7D)
1
0
0
0
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
Remains "0"
Remains "0"
Remains "0"
Remains "0"
Remains "0"
Remains "0"
Remains "0"
Remains "0"
Network power supply
Unused
Extension module external power supply
Unused
:
:
:
Unused
WIRING INSTRUCTIONS
■ SCREW TERMINAL (Output)
Torque: 0.5 N·m
• SOLDERLESS TERMINAL
Refer to the drawing below for recommended ring tongue
terminal size. Spade tongue type is also applicable.
Applicable wire size: 0.25 to 1.65 mm
Recommended manufacturer: Japan Solderless Terminal
MFG. Co., Ltd, Nichifu Co., Ltd
■ EURO TYPE CONNECTOR TERMINAL (DeviceNet)
Applicable wire size: 0.2 – 2.5 mm
Stripped length: 7 mm
R7D-YS2
(AWG 22 to 16)
2
3.3 (.13) max
mm (inch)
2
EM-7802-E Rev.6 P. 6 / 10
Advertisement
