Table of Contents
Advertisement
3.5.2Pole Mounting
Preparation: mountingbracket
, hose clamp and other requiredtools.
(with a screw)
A. Loosen the hose clamp by turningthe locking mechanism counter-clockwise.
B. Straighten out the hose clamp and slide it through the rectangular rings in the mounting bracket,
wrap the hose clamp around the pole.
C. Use a screwdriver to tighten the locking mechanism by turningit clockwise.
D. Hang the device to the mounting bracket via bracket mounting screws on the back of device, then
screw the bracket screw to the bottom of the device.
10
Advertisement
Table of Contents
