Table of Contents
Advertisement
7. Network Server Configuration
UG67 can work as network server and transmit data to IoT Cloud or other platform via
MQTT/HTTP/HTTPS.
Make sure the gateway connects to the networkas shown in
Section
5.
7.1 Connect G67 to Milesight IoT Cloud
A. Go to "Packet Forwarder" → "General" page to enable the embeddednetwork server.
B. Go to "Packet Forwarder" → "Radio" page to select the antenna type, center frequency and channels.
The channels of the gateway and nodes need to be the same.
C. Go to "Network Server" → "General" page to enable the network server and "Milesight IoT Cloud"
mode.
19
Advertisement
Table of Contents
