Table of Contents
Advertisement
5. Network Connection
This section explains how to connect the gateway to network via WAN connection, Wi-Fior cellular.
5.1 Configure the Ethernet Connection
A. Go to "Network"→ "Interface" → "Port" page to select the connection type and configure Ethernet
port information.
B. Click "Save & Apply" for changes to take effect.
C. Connect Ethernet port of gateway to devices like router or modem.
D. Log in the web GUI via the newly assigned Ethernet port IP address and check network connection.
5.2 Configure the Wi-Fi Connection
A. Go to "Network"→ "Interface" → "WLAN" and select "Client"mode.
B. Click "Scan" to search for Wi-Fiaccess point.Select the available one and click "Join Network".
14
Advertisement
Table of Contents
