Table of Contents
Advertisement
E. You can view system information and perform configuration of the gateway.
4.2 Wired Access
Connect PC to G67 ETH port through PoE
injector. The following steps are based on Windows 10
operating system for your reference.
A. Go to "Control Panel" → "Network and Internet" → "Network and Sharing Center", then click
"Ethernet" (May have different names).
Go to "Properties" → "Internet Protocol Version 4(TCP/IPv4) "and select "Use the following IP
B.
address", then assign a static IP manually within the same subnet of the gateway.
12
Advertisement
Table of Contents
