Table of Contents
Advertisement
6. Packet Forwarder Configuration
G67 has installed multiple packet forwarders including Semtech, Chirpstack-Generic MQTT broker, etc.
This section explains how to connect the gateway to network servers.
Make sure the gateway connects to the network as shown in
Section
5.
A. Go to "Packet Forwarder" → "General"page and click
to add a network server.
B. Fill in the server information and enable this server.
C. Go to "Packet Forwarder" → "Radio" page to configure antenna type, center frequency and channels.
The channels of the gateway and network server need to be the same.
17
Advertisement
Table of Contents
