Gatewayinstallation; 1Wall Mounting - LINOVISION IOT-G67 Quick Start Manual

Outdoor lorawan gateway
Table of Contents

Advertisement

3.5 Gateway Installation
G67 can be mounted to a wall or a pole. Before you start, make sure that your SIM
card has been
inserted, your antennas have been attached and all cables have been installed.
Note: Do not connect device to power supply or other devices when installing.
3.5.1 Wall Mounting
Preparation: mounting bracket (with a screw), wall plugs, wall mounting screws and other required
tools.
A. Align the mounting bracket horizontally to the desired position on the wall, use a marker pen to mark
four mounting holes on the wall, and then remove the mountingbracket from the wall.
Note: The connecting lines of adjacent points are at right angles.
B. Drill four holes with a depth of 32 mm by using your drill with a 6 mm drill bit on the positions you
marked previously on the wall.
C. Insert four wall plugs into the holes respectively.
D. Mount the mounting bracket horizontally to the wall by fixing the wall mounting screws into the wall
plugs.
E. Hang the device to the mountingbracket via bracket mountingscrews on the back of device, then
screw the bracket screw to the bottom of the device.
9

Advertisement

Table of Contents
loading

Table of Contents