Cooling Unit; Input Potentiometer - Cebora WIN TIG AC-DC 230 M Instruction Manual

9�3�2

Cooling unit

The cooling unit to be used with the WinTIG power source is Item No. 1685 - GRV20.
The status bar S always shows the cooling unit icon
ON, OFF, AUTO.
9�3�3

Input potentiometer

If the potentiometer accessory is recognised, the
60/65
and unit status is shown in the upper part of the icon:
Encoder B is used to select/activate the operating mode:
OFF Cooling unit disabled.
ON Cooling unit always on.
AUTO Cooling unit operates in synchrony with the welding process
symbol will appear in the status bar
ON: allows the potentiometric input on connector P to be read.
OFF in Spot: the potentiometric input is not used, only in spot mode.
3301286