Related Manuals for Nivel System NL Series
Summary of Contents for Nivel System NL Series
- Page 1 Rotation Laser NL610 Thank you for purchasing a Nivel System NL610 laser level. To best use the purchased instrument, Please read the instructions carefully and put in a convenient spot so that in the future you will be able to use it.
- Page 2 NOTE: The device comprises a nickel-hydrogen batteries, the batteries must be recycled and should be disposed of in accordance with the requirements (WEEE-Reg.: DE23874031)
- Page 3 The device is powered by rechargeable batteries which use advanced micro-controlled charging technology. NL series levels may designate a vertical or horizontal laser plane, additionaly the device define the axis of the laser plane (laser line - point up and down). The device can also "draw" a laser line (scan function) –...
- Page 4 The laser beam can be hazardous to the human eye if the device is improperly operated. Never repair the laser by your own. Protect your eyes from damage. Never look into the laser beam Risk of fire and electric shock. ...
-
Page 5: Control Panel
6. The manufacturer and its representatives are not liable for damage caused by improper activities or reactions as a result of combining with other products. BATTERIES The NL610 used nickel-hydrogen batteries that can be recharged. Charging the battery is done by the AC adapter (included in standard) - Use the connector on the front panel of laser level. - Page 6 3) Select the inclination in axis (X, Y) - Use the button to select the direction of the inclination (X or Y axis). Plane can be tilted up to ± 4) laser inclination mode switch (device automatically switches to manual mode) 5) movement alarm mode (TILT) - The laser is able to secure.
-
Page 7: Principle Of Operation
To set the inclination in the X-axis, press the buttons 7, respectively (positive values) or 8 (negative values) - every time pressing the laser beam will tilt to the surface - in the X or Y plane, on the top cover of the laser are marked directions of inclinations. Positive values will incline laser plane according to the arrow on the top cover, negative - in the opposite direction) After entering the inclination value for the X-axis, Y-axis, press 3 again after approx. - Page 8 switching on the laser level the device will level by itself – the head will start to rotate - setting a vertical plane. The laser plummet (top) defines a line perpendicular to the plane of the laser level, which is used in all perpendicular works (building partitions, setting 90° angle, etc.). Remote control Features of NL610 laser level can be controlled remotely using the remote control.
- Page 9 Checking the laser level You should regularly check the following parameters of the laser level setting a horizontal plane cone error setting a vertical plane Checking and calibration of the horizontal and vertical planes is simple and in most cases can be done by the user.
- Page 10 Checking the cone error Please do this procedure after calibration of horizontal plane. Set the laser centered between the walls distanced from each other of 30 m. Set the instrument in the X or Y direction. Mark the position of the laser beam on both walls. Turn off the instrument and move it near to the of one of the walls (1 to 2 meters).
- Page 11 Laser sensor 1. Specification Range of reception: 50 mm Accuracy operation modes: precise: ± 1mm coarse: ± 2mm display: power DC 9 V (alkaline battery) auto turning off The sensor is automatically turn off in 30min if it will not detect a laser beam, (if you want to turn the sensor on once again please press the power button.
- Page 13 To use the free warranty extension to 24 months, the instrument must be registered within 3 months from date purchase. Registration done website: http://www.tpi.com.pl/rejestracja-gwarancji Nivel System – service and support TPI Sp. z o.o., Bartycka 22, 00-760 Warsaw, Poland +48 22 651 03 06, +48 22 651 03 09, tpi@tpi.com.pl www.nivelsystem.com...