Option 3 Unit Id; Option 4 Network Parameters - Intermec 6210 User Manual

Hand-held computer

Hide thumbs Also See for 6210:

Table of Contents

PEN*KEY

Utilities Program

Option 3 UNIT ID

If you select this option, the Change Unit ID pop-up menu

appears:

Enter up to eight characters to change the Unit ID. Use the

[¬SP] key to backspace and use the [CLR] to restore the

previous ID. Press the [YES] key to save the new ID and

return to the Communications Settings menu. Press the

[F4] key to reset the ID to factory default. Press [NO] to

exit this pop-up menu.

Network Parameters appears as Option 4 when Option 2.

COMM SETTINGS is set to one of these three NETWORK

options: NRINET, TFTP, or NOVELL NETWARE.

B-20

6210 Hand-Held Computer User's Guide

CHANGE UNIT ID

UNIT ID

2233233

WORKGROUP

6200IPL

[F4]RESET FACTORY

[NO]QUIT

APPENDIX B

Table of Contents