Table of Contents
Advertisement
™
EVERSKY
Connection of the communication wire on the P1 port (RS485)
IX.7. TCP-IP Communication (Modbus TCP / Bacnet IP/ Webserver) (TCP/IP port)
The use of Modbus TCP or Bacnet IP protocols need to use an Ethernet cable with RJ45 type connector. The connector plugs directly
into the TCP/IP at the bottom right of the controller as below:
Connection of the Ethernet cable on the TCP/IP port of the controller
IX.8. HMI – Human machine interfaces
IX.8.a.
General information
The unit is equipped as standard with a mobile wired LCD HMI (E3-DSP-CLD) and can optionally receive a wired touch HMI (ED-
Touch) that can be moved up to 100m.
Remote touch HMI
Local HMI
E3-DSP
ED-Touch (optional)
To be wired
10m
Wiring diagram of standard (E3-DSP-CLD) and optional (ED-Touch) HMIs
MS-CDF-019 – Manufacturing Nr: 220001→
Version B
Update: 2022/06/14
23/70
Advertisement
Table of Contents
Troubleshooting
