Raider Pro Solo RDP-SBBC20 User Manual page 16

16 www.raider.bg
5. Battery and charger information.
The machine is supplied without a battery and charger. Use only battery and charger from the
R20 System series.
6. Maintenance and service.
6.1. Maintenance and cleaning.
To work well and safely, keep the angle grinder and the ventilation openings clean. Make periodic
breaks in work. Store and handle the accessories carefully.
Wipe the machine with a clean cloth or blow it with compressed low pressure air. Clean it regularly
with a damp cloth and a little soft detergent. Do not use detergents or solvents.
6.2. The cordless brush cutter is equipped with a brushless motor.
6.3. If an abnormal noise occurs on the cordless brush cutter, stop working immediately and contact
your nearest RAIDER service center.
7. Environmental protection.
7.1.In order to protect the environment, the power tool and packaging must be suitably processed
for the re-use of the raw materials contained therein. Do not dispose of power tools in household
waste! According to the European Union Directive 2012/19 / EC on end-of-life electrical and electronic
devices and the validation and as a national law, power tools that can no longer be used must be
separately collected and subjected to appropriate processing for the recovery of the contents raw
materials.