Safety And Installation Precautions; Warnings And Symbols; Use For Intended Purpose; Organizational Measures - CZone Signal Interface User & Installation Manual

3 SAFETY AND INSTALLATION PRECAUTIONS

WARNINGS AND SYMBOLS

Safety instructions and warnings are marked in this manual by the following pictograms:
CAUTION
Special data, restrictions and rules with regard to preventing damage.
WARNING
A WARNING refers to possible injury to the user or significant material damage to the Signal Interface
if the user does not (carefully) follow the procedures.
A procedure, circumstance, etc, which deserves extra attention.

USE FOR INTENDED PURPOSE

1. The Signal Interface is constructed as per the applicable safety-technical guidelines.
2. Use the Signal Interface only:
In technically correct conditions
•
• In a closed space, protected against rain, moisture, dust and condensation
• Observing the instructions in the installation manual
WARNING Never use the Signal Interface in locations where there is danger of gas or dust explosion
or potentially flammable products!
3. Use of the Signal Interface other than mentioned in point 2 is not considered to be consistent with the
intended purpose. BEP Marine is not liable for any damage resulting from the above.

ORGANIZATIONAL MEASURES

The user must always:
Have access to the user's manual and be familiar with the contents of this manual
•

MAINTENANCE AND REPAIR

• Switch off supply to the system
Be sure that third parties cannot reverse the measures taken
•
• If maintenance and repairs are required, only use original spare parts

GENERAL SAFETY AND INSTALLATION PRECAUTIONS

• Connection and protection must be done in accordance with local standards
Do not work on the Signal Interface or system if it is still connected to a power source. Only allow changes
•
in your electrical system to be carried out by qualified electricians
• Check the wiring at least once a year. Defects such as loose connections, burned cables, etc. must be
corrected immediately
EN / CZone® Signal Interface (SI) User & Installation Manual
4