Bush VL19HDLED Instruction Manual page 33

Standard features
Simple everyday use
3. Press thebuttons to navigate the menu and
change the settings.
Country
Selects the country where you will operate the TV.
Mode
Selects the auto scan mode: DTV+ATV/DTV/ ATV. (DTV
mode)
Start
Press the OK button to start auto tuning.
Auto Scan
Scanning CH34
Digital Channels Found:
DTV :10 Radio :0 Data:0
Analog Channels Found: 0
If you st op the tuning before it has
the TV w ill report a no s ignal
error. This is n ormal because all previous
channel memory has been cleared before
tuning is carried out.
Manual Scan (DTV Mode)
Allows you to make manual fine tuning adjustments to
the channel under DTV mode.
1. Press the MENU button to display the main menu.
Press the  buttons to select Channel in the main
menu, then press the  or OK button, it will highlight
the first option.
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Move OK: Select
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105.
MENU: Skip EXIT: Exit
Cable
Off
MENU: Return EXIT: Exit
2. Press the  buttons to select Manual Scan and then
press the OK button. On the submenu, select Digital
Manual Scan and then press the OK button.
Tuner type is
Antenna
Digital Manual Scan
Digital Scan CH21
Start
Frequency 474.00 MHz
Strength 0
Move Adjust 0~9 Input MENU: Return EXIT: Exit
Tuner type is Antenna.
Digital Scan
Press the  buttons to select the desired channel.
Start
Press the  buttons to select Start and then press the
OK button to start tuning.
Tuner type is Cable.
Network ID
Press the buttons to select Network ID: Auto or nter
digital numbers.
Symbol Rate
Press the buttons to select Symbol Rate: Auto or
nter digital numbers.
Modulation
Press the  buttons to select Modulation:Auto,16QAM
,32QAM,64QAM,128QAM,256QAM.
Start
Press the buttons to select Start and then press the
OK button to start tuning.
Manual Scan (ATV Mode)
Allows you to make manual fine tuning adjustments if
the channel reception is poor under ATV mode.
1. Press the MENU button to display the main menu.
Press the  buttons to select Channel in the main
menu, then press the  or OK button, it will highlight
the first option.
Standard features
Tuner type is
Cable
Digital Manual Scan
Network ID Auto
Frequency 474000 KHz
Symbol Rate Auto
Modulation Auto
Start
Strength 0
Move Adjust MENU: Return EXIT: Exit
33