Bush VL19HDLED Instruction Manual page 36

Standard features
Simple everyday use
3. A Common Interface main menu will pop up. Press
the  buttons to select the items and press the OK
button to confirm.
Common Interface
Viaccess Conditional Access
Main Menu
1. Consultation
2. Settings
3. Upgrade
Press 'OK' to confirm, 'EXIT' to quit
Move
4. Press the EXIT button to exit the menu.
The common interface allows the use of a Common
Access Module to enable you to view scrambled (pay to
view) services. These services are provided by TopUp TV
(UK only) and others. The Common Access Module and
viewing card can be obtained from the service provider.
Do not repeatedly insert or remove the Common
Access Module as this may damage the interface
and cause a malfunction.
This feature is not available in all country.
CI (Common Interface) C
A Allows the Common Access Module to be
inserted and access the content that has been in
encrypted.
To insert the Common Access Module
1. Before you insert the Common Access Module,
ensure that the TV is switched off and the viewing card
is inserted in accordance with the Service Provider's
instructions.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
36
Standard features
OK: Select MENU: Return EXIT: Exit
Common Access Module
2. Insert the Common Access Module into the slot. Flip
the Common Access Module to another side and try
again if you feel resistance.
3. Switch the TV on.
To remove the Common Access Module
1. Before you remove the Common Access Module,
ensure that the TV is switched off.
2. Pull the Common Access Module from the slot.
3. Switch the TV on.
Signal Information (DTV mode)
1. Press the MENU button to display the main menu.
Press the  buttons to select Channel in the main
menu, then press the  or OK button.
2. Press the  buttons to select Signal Information
and then press the OK button to view the Signal
Information.
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Move OK: Select
3. Press the EXIT button to exit the menu.
Lock System management
1. Press the MENU button to display the main menu.
Press the  buttons to select Lock System in the main
menu, then press the  or OK button,it will highlight the
first option.
2. Use the 0-9 buttons to input a 4-digit password to
enter the Lock System menu.
3. Press the  buttons to select the option you want
to adjust in Lock System menu.
4. Press the  buttons to change the following
settings.
Cable
Off
MENU: Return EXIT: Exit