Viewing Remote Control - Bush VL19HDLED Instruction Manual

Getting to know your TV
You'll be up and running in no time

Viewing remote control

Power: Switches the TV between on and
standbymode.
0-9 Number Button: Press to select a
-/-- : Press this button before entering a
programme greater than 09.
P.MODE : Select picture mode: Dynamic / Standard /
Mild / Personal.
S.MODE : Select sound mode: Standard / Music / Movie
/ Personal.
AUTO : Press to adjust automatically in VGA
mode.
VOL+/- : Adjust the volume.
CH.LIST : Display channel list. (ATV / DTV mode)
INPUT : Select among the di erent input signal
sources: DTV / ATV / AV / SCART / YPbPr /
HDMI / PC / Media.
MENU : Display the OSD (On Screen Display) menu.
FAV/FAV+/FAV- : PressFAV to display the Favourite Channellist.
Press FAV+/FAV- to follow lower / higher
channel number programme in the favorite list.
HOLD : Freezes a multi-page passage on screen in
teletext. (ATV / DTV mode)
INDEX : To select the page number of the index
from teletext. (ATV / DTV mode)
: •To start the timeshift playback. (DTV mode)
•To start playback or pause. (USB mode)
AUDIO : Press to switch the audio mode.
: Press once to stop. (USB mode)
SIZE : To enlarge the picture on the TV in teletext.
(ATV / DTV mode)
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
12
Getting to know your TV
programme. (ATV /
DTVmode)
Mute: Mutes and restores
your TV sound.
Return to the previous viewing channel.
:
(ATV/ DTV mode)
SLEEP : Set the TV sleep timer.
MTS : To change among Stereo,Dual I, Dual IIand Mixed.
INFO : Displays the status information.
CH+/- : Select a channel.
FREEZE : Press this key to control the auto time of turn
o .Press again to restore the picture.
ASPECT : Select from the following mode settings: Full/
Zoom1 / Zoom2 / 4:3.
Allows you to navigate the OSD menus and
:
adjust the system settings to your preference.
OK : • Confirm the selection in the OSD menus.
• Display a list of channels saved in the TV tuner
memory.
EXIT : Exit the OSD (On Screen Display) menu.
TEXT : Turn on and o the Teletext function. (ATV/ DTV mode)
EPG : Display the EPG (Electronic Program Guide).(DTV mode)
SUBTITLE : Display the subtitle which is broadcast with
the program. (DTV mode)
SUBPAGE : Displays the subpage on the teletext
screen.(ATV / DTV mode)
: Record the current programme. (DTV mode)
REVEAL : Reveals hidden information such as the
answer to a quiz in teletext. (ATV / DTV mode).
: To reverse playback rapidly. (USB mode)
To advance playback rapidly. (USB mode)
:
: To skip to the beginning of the previous
chapter / track / photo. (USB mode)
: To skip to the beginning of the next chapter /
track / photo. (USB mode)